Please call us, we want to help.
We know that these are large purchase items and we don't want you to do it alone, please call us so we can help you through the process and answer any questions that you might have!
This quote is for a freestanding W-pan aluminum awning kit manufactured by Amerimax Building Products. The posts will attach to the 5-1/2in Extruded Fascia/Gutter. There is no overhang with this kit.
What is included with this kit:
|3-1/2x12in Structural W panels||5-1/2in Extruded Fascia Gutter|
|Extruded 5-1/2in Side Facia||3x3in Cloverleaf Posts Steel-0.041in thick|
|Extruded Lock Tab||Extruded Corner Caps|
|Color Trim||Colonial Post Bracket for Cloverleaf Post|
|Roll formed Downspout||Downspout Elbow|
|Gutter Drop Outlet||Gutter Plug|
|Self Tapping Tek Screws||Sheet Metal Screws|
|Caulking||Touch up paint - .6 oz bottle or 12 oz can depending on kit|
What you provide:
- Concrete for footings – (see below)
- Steel bar for reinforcement in footings – (see below)
This Awning is intended to be freestanding. This estimate also includes general engineering guidelines that you should adhere to where appropriate.
The engineering for this kit is based off of Amerimax engineering.
|Slope||The minimum slope requirement is 1/2 inch per foot.|
|Wind Load||The wind load for this kit is 90 MPH. This kit is engineered for an exposure B area. This refers to urban or suburban areas, wooded areas, or other terrain with numerous closely spaced obstruction having the size of single-family dwellings or larger.|
|Snow Load||The snow load will be as selected. Snow loads are given in pounds per square foot and range from 10 to 60 PSF. This measurement is also referred to as live load. In most cases even light snow areas will begin at a 20lb load. A 10lb load is for areas that receive no snow. Contact you building department for your local required ratings.|
|Post Spacing||The max post spacing is indicated for each kit in the description. The side overhang (from post to side fascia) cannot exceed 25% of the actual post spacing.|
|Length||Length will be as selected in 1 foot increments.|
|Height||This is the distance from the ground to the bottom of the header. In other words this is the post height.|
|Projection||The distance from the gutter/fascia on one side to the gutter/fascia on the other side.|
|Overhang||There is no overhang with this kit.|
|Permits||If a permit is being pulled, customers are responsible for getting these plans and the engineering approved by the local building department or appropriate organizations. For accurate requirements for snow and wind loads, please contact your local building department or authority. Please contact Absolute Carports if Engineering is needed. |
POST TYPE AND GROUND ATTACHMENT
|Footing Attachments||All freestanding structures require a poured footing. These must be poured with the post being embedded into the concrete. For this reason your quote will indicate a post size that is 2 feet longer than the awning height. This extra 2 feet is intended to be used in the footing. The post is 3 inches by 3 inches and constructed of 0.041 inch thick steel. No brackets or bolts are needed for a footing attachment. Customers must provide the concrete and steel bar for reinforcement for each footing. Each quote will indicate a footer size. This amount should be cubed for each footing. Please see Footing Engineering for footing details on post depth and steel bar reinforcement.|
General installation instructions can be found on this site. These are general instructions only and will not cover every situation. Customers are welcome to call Absolute Carports with questions but ultimately customers are responsible for their own installations. It is recommended that customers be familiar and comfortable with tools and assembling. These kits will require cutting and drilling. Parts of this kit may use splices. Extra length is given to some parts to aid customers for in field adjustments. A list of needed tools can be found in the General Instructions.
These products are manufactured by Amerimax Building Products using the latest best practices. We are proud to sell a product that the manufacturer stands behind 100%.
Click here to see product warranty information.
Allow about 1-1/2 to 2 weeks for manufacturing and about 1 week for shipping. Absolute Carports cannot guarantee a shipping date as these kits are custom manufactured. Kits ship by freight and customers must be present at delivery to unload the product. Customers should receive a phone call by the freight company to verify a delivery time. If damages occur as a result of shipping customers must indicate it on the bill of lading or refuse the product and inform Absolute Carports within 7 days of delivery. All sales are final; products that are refused without damage will not be reimbursed. No returns.