This is hanger for W panels. It is constructed of extruded aluminum.
|
Size: |
For use with 3-1/2in W pans |
|
Length: |
20ft |
|
Thickness: |
0.050in |
|
Colors: |
Mill Finish |
|
Common Uses: |
To be used as a hanger for 3-1/2in W pans. |
|
Helpful Tips: |
This is often used when attaching the awning to the fascia of an eave that is verticaly level. The G hanger has a little more slope built in to it than the roll formed C hanger. |
|
Reminders: |
ICBO Engineering requires about 1/2in per foot slope minimum. |
|
Related Items: |
See roll formed C hanger |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |