This is a bracket constructed of extruded aluminum.
|
Size: |
3in x 3in |
|
Length: |
6in or 10ft |
|
Thickness: |
0.060in |
|
Colors: |
White |
|
Finish: |
Painted |
|
Texture: |
Smooth |
|
Common Uses: |
This should be used for attaching a Cloverleaf Post to a slab or wood deck where there is no snow load. |
|
Helpful Tips: |
For wood deck attachments use lag bots through the floor boards and into the joists or use standard bolts with washers and nuts on floor boards. See engineering for details. |
|
Reminders: |
These are not intended to be use in snow load bearing structures. Structures with snow bearing loads should use a buried footing with embedded steel Cloverleaf Posts. |
|
Related Items: |
Anchor bolts are not included but may be purchased separately. |
|
Instructions: |
The bracket will insert into the Cloverleaf Post leaving only the two extended ""wings"" to be seen. These will be anchored to the ground. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via UPS Ground. Please call us if you are combining this product with one of our large products that must ship freight. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding this product to the freight shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |