This is a rail that is used with some extruded hangers. It is constructed of extruded aluminum.
|
Size: |
1-1/4in |
|
Length: |
20ft |
|
Thickness: |
0.062in |
|
Colors: |
Mill Finish |
|
Common Uses: |
This is nesessary part to complete the swivel system of the Extruded J hanger and the Alaskan hanger. |
|
Related Items: |
See Extruded J hanger and Aalaskan hanger. |
|
Instructions: |
Install Awning rail first. Then slide the hanger into position. In some extreme cases where space is an issue, the hanger should be attached prior to installing the Awning rail. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |