This is an Alumawood Side Plate kit. This kit includes 1 side plate with foam and mitered end cap.
|
Size: |
2in x 6.5in |
|
Length: |
Available in 8ft-8in 10ft-8in and 12ft-8in |
|
Thickness: |
0.024in |
|
Colors: |
White Desert Sand Sonora Beige Mojave Tan Adobe Latte |
|
Finish: |
Tuff Coat |
|
Texture: |
Cedar Embossed "Wood Look" |
|
Common Uses: |
To be used as Side Plates for Alumawood Posts in lattice pergola awning and patio covers. |
|
Helpful Tips: |
Side Plates will extend 8in past the Alumawood Post when used with a 3in x 8in Header. |
|
Reminders: |
The Foam is to help with noise reduction and impact resistance. |
|
Related Items: |
Alumawood Posts are not included but can be purchased separately. |
|
Instructions: |
Side Plates should sandwich the Alumawood Post and 3in x 8in Header connection. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |