This is a hollow beam made of roll formed aluminum.
|
Size: |
2in x 6.5in or 3in x 8in |
|
Length: |
Available in incriments of 1ft from 7ft to 24ft lengths. |
|
Thickness: |
Rafters can be 0.024in or 0.032in and Headers are 0.042in. |
|
Colors: |
White Desert Sand Sonora Beige Mojave Tan Adobe |
|
Finish: |
Tuff Coat |
|
Texture: |
Cedar Embossed "Wood Look" |
|
Common Uses: |
3in x 8in peices can be used as Headers Rafters and sometimes ledger board covers. The 2in x 6in peices are used as Rafter and sometimes ledger board covers. They are used in lattice pergola arbor |
|
Helpful Tips: |
Alumawood Rafters and Headers should not take the place of a wood ledger board. |
|
Reminders: |
Rafters are not intended to be used as Headers. |
|
Related Items: |
End Caps are not included by may be purchased separately. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |