This is a hollow tube of roll formed aluminum to be used as lattice.
|
Size: |
1.5in x 1.5in or 2in x 2in |
|
Length: |
Alvailable in 1ft incriments from 4ft to 24ft in 1.5in square and 6ft to 26ft in the 2in square. |
|
Thickness: |
0.018in |
|
Colors: |
White, Desert Sand, Sonora Beige, Mojave Tan, Adobe, Latte |
|
Finish: |
Tuff Coat |
|
Texture: |
Cedar Embossed "Wood Look" |
|
Common Uses: |
For use as Lattice in lattice pergola awning and patio covers. |
|
Helpful Tips: |
For extra long projects try our lattice splices. They can be spliced right over a Rafter to hide the connection. |
|
Related Items: |
End Caps are not included but can be purchased seperately. |
|
Instructions: |
For 1.5in Lattice use 3in on center spacing. For 2in Lattice use 4in on center spacing. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |