This is a hanger made of extruded aluminum and meant for V panels.
|
Size: |
1in x 2-1/2in |
|
Length: |
20ft |
|
Thickness: |
0.062in |
|
Colors: |
White |
|
Finish: |
Painted |
|
Texture: |
Smooth |
|
Common Uses: |
This Hanger is to be used with V panels. |
|
Helpful Tips: |
This Hanger also require the Awning rail. This allows a degree of swivel for making the slope. |
|
Reminders: |
The smoothe roll formed C hanger may be used in place of this hanger but it will not swivel. |
|
Related Items: |
See Awning rail -punched |
|
Instructions: |
The pans will be fastened from the top and bottom of this hanger with screws. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |