This is an alumawood post and sideplate kit. This kit includes 1 alumawood post, 2 alumawood sideplates with mitered end caps and foam inserts, top post bracket, bottom post bracket, anchors, screws and hole plugs.
|
Size: |
3in x 3in Alumawood Post and 2in x 6.5in Side Plates |
|
Length: |
Available in 8ft 10ft and 12ft lengths. |
|
Thickness: |
0.024in |
|
Colors: |
White Desert Sand Sonora Beige Mojave Tan Adobe |
|
Finish: |
Tuff Coat |
|
Texture: |
Cedar Embossed "Wood Look" |
|
Common Uses: |
Kits are intended to be used as posts for lattice pergola awning and patio covers. |
|
Helpful Tips: |
Use a cloverleaf insert to acheive greater strength. |
|
Reminders: |
The lengths given is the post length. Side Plates will be 8in longer than Posts. |
|
Related Items: |
3in x 8in Headers are not included but may be purchased seperately. |
|
Instructions: |
Attach a 3in x 8in header at the top of the post and in between the two SIde Plates. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |