This is a splice to be used with the 5-1/2in Header. It is constructed of extruded aluminum.
|
Size: |
5-1/2in |
|
Length: |
16in or 20ft |
|
Thickness: |
0.08in |
|
Colors: |
Mill Finish |
|
Common Uses: |
This material is to be used as a splice to join two pieces of 5-1/2in Header together. |
|
Helpful Tips: |
This is for 5-1/2in Header only. |
|
Instructions: |
Slide splice halfway into one piece of 5-1/2inch Header. Then slide the other half into the other piece of 5-1/2in Header. Secure the splice with Tek screws on each side. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via UPS Ground. Please call us if you are combining this product with one of our large products that must ship freight. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding this product to the freight shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |