This is an Alumawood Post constructed of roll formed aluminum. It has a sqaure cut on both ends. - End Caps are not included.
|
Size: |
3in x 3in |
|
Length: |
Available in 1ft increments from 7ft to 24ft. |
|
Thickness: |
0.024in |
|
Colors: |
White Desert Sand Sonora Beige Mojave Tan Adobe Latte |
|
Finish: |
Tuff Coat |
|
Texture: |
Cedar Embossed "Wood Look" |
|
Common Uses: |
This is intended to be used with 3in x 8in Headers and 2in x 6.5in Side Plates for lattice pergola awning and patio covers. |
|
Helpful Tips: |
For greater strength use a Cloverleaf Post as an insert. |
|
Reminders: |
When used with a 3in x 8in Header and 2in x 6.5in Side Plates the post should be 8in shorter than the Side Plates. |
|
Related Items: |
3in x 8in Headers and 2in x 6.5in Side Plates are not included but can be purchased separately. |
|
Instructions: |
The 3in x 8in Header will attach to the top of the post and the Side Plates will sandwich both of them. |
|
Shipping: |
This product can be picked up for free at any of the Amerimax factories. Factories are located in Sacramento, CA 95834, Romoland, CA 92585, Las Vegas, NV 89030, and Phoenix, AZ 85043. It can also be shipped via common carrier freight. Please call us if you are combining this product with one of our smaller parts that ships via UPS Ground. In checkout it will try to split the order into two shipments but if you call us we can save you shipping costs by adding the small product to the frieght shipment. |
|
Qualifications: |
The measurements indicated are approximate and may not be exact. If exact measurements are needed please refer to the engineering. The engineering and information on this site is for your reference only. Absolute Carports recommends that you get your plans and this engineering approved by your local building department before you purchase. |